How to Replace Emergency Exit Light Batteries?

Ensuring safe exits during emergencies is crucial. One vital part of this safety plan is having operational emergency exit lights. However, over time, the batteries in these units can lose their charge. That’s why knowing how to perform emergency exit light battery replacement is essential.

The company is the world’s best emergency exit light battery replacement supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Tools You Will Need

Before you begin, gather the following tools:

1. New batteries (check the model for compatibility)
2. Screwdriver (flat-head or Phillips, depending on the fixture)
3. Multimeter (to check the existing battery's voltage)
4. Work gloves (for safety)

Step-by-Step Guide to Battery Replacement

Let’s walk through the process together. Ready? Let’s start!

Step 1: Turn Off the Power

First things first, safety is critical. Locate the circuit breaker for your emergency lights and turn off the power. This will prevent any electrical shocks or issues while you work.

Step 2: Access the Emergency Exit Light

Use your screwdriver to remove the cover of the emergency exit light. Most units have a simple latch or screws securing the cover. Once it’s off, expose the inner components.

Step 3: Remove the Old Battery

Now it’s time for the old battery. Carefully disconnect the battery from its terminals. It’s often a simple clip or connector. If the battery feels stuck, gently wiggle it free without forcing it.

Step 4: Test the Old Battery

Before you install a new battery, it’s good practice to test the old one. “How do I do that?” you might ask. Use the multimeter! Set it to voltage and check if the battery still holds a charge. If it’s below the required voltage, it’s time for a replacement.

Step 5: Install the New Battery

Take your new battery and connect it to the terminals. Ensure each connection is firm and secure. “Is it in properly?” you may wonder. Gently tug on the wires to be sure!

Step 6: Replace the Cover

With the new battery installed, carefully replace the cover on the emergency exit light. Secure it tightly with screws or clips. Make sure everything looks in order and neat.

Step 7: Restore Power

Head back to the circuit breaker and turn the power back on. This allows the unit to test if the new battery is functioning correctly. You might see the light blink briefly, indicating it's operational.

Step 8: Final Check

Lastly, take a moment to ensure everything is working as it should. If the light remains operational, you successfully completed the emergency exit light battery replacement!

Maintenance Tips

To keep your emergency exit lights functioning, perform regular monthly checks. Replace batteries every year or as needed. If you ever notice flickering or dim light, it might require immediate attention.

Conclusion

Replacing the emergency exit light battery is a straightforward process. With just a few tools and careful steps, you can ensure safety lighting remains effective. Should you have any questions or need supplies, feel free to reach out to us. We’re here to help you keep your spaces safe!

Contact us to discuss your requirements of hitachi 14 volt battery. Our experienced sales team can help you identify the options that best suit your needs.